The I-Drive irons features a deep notched cavity that moves the weight farther behind the face increasing forgiveness and accuracy, even on off-center shots. By moving weight from the center of the club, to the heel and toe and across the back behind the deeply notched cavity, this increases the perimeter weighting for maximum forgiveness, especially on off-center hits. It also increases the MOI for added stability and a more solid feel. Of all the Callaway clones, this model is the easiest to play for all levels of player.
The I Drive Hybrid Utility Iron features a shallow head design that moves the center of gravity lower and farther behind the face to promote a higher launch angle so you can play the long shot out of a bad lie as accurately as a short shot from the fairway. With the weighted sole design and the sculpted sole features the Moment of Inertia has been maximized to produce a club head that reduces the problem of any mis-hit shots. The optimized offsets assures a player of a consistently solid contact on every swing. The 17-4Ph Stainless Steel body is constructed for maximum control and forgiveness. A great hybrid design that can be hit from the tee, the rough or the fairway. A great match to the I Drive Square Titanium Driver, Square Stainless Steel Fairway Woods and Irons.
These irons are assembled with choice of shaft to a ladies standard 3 iron length of 37 1/2" (graphite shafts 1/2" longer) and your choice of grip
.This club is assembled to a standard ladies #1 Hybrid length of
39 1/2" with your choice of shaft (graphite shafts are 1/2" longer) and grip.Shaft Recommendations:
SPECIFICATIONS
| IRON Heads | HYBRID Heads | ||||||||||||||
| HEAD | #5 | #6 | #7 | #8 | #9 | PW | AW | SW | LW | #2 | #3 | #4 | #5 | #6 | Tolerance |
| LOFT | 27° | 31° | 35° | 39° | 43° | 47° | 51° | 55° | 60° | 16° | 19° | 22° | 25° | 28° | ±1° |
| LIE | 60° | 61° | 62° | 63° | 64° | 64° | 64° | 64° | 64° | 58° | 58° | 58.5° | 59° | 59.5° | ±2° |
| WEIGHT | 258g | 265g | 272g | 279g | 286g | 293g | 300g | 305g | 309g | 224g | 230g | 237g | 243g | 250g | ±4g |
| OFFSET | 6.5mm | 6mm | 5.5mm | 5mm | 4.5mm | 4mm | 3.5mm | 3mm | 3mm | 1mm | 1mm | 1mm | 1mm | 1mm | ±0.5mm |
|
MATERIAL-17-4Ph Stainless |
||||||||||||||
IN GOLF INC. PO BOX 1311/819 18th ST. BEDFORD, IN 47421
1-800-359-2404 M-F 10-5 EDT
sales@golf-components.com
customerservice@golf-components.com
techsupport@golf-components.com